Demo Trailer at the Midland Energy Expo 2014
SPOC Automation Blog

Demo Trailer at the Midland Energy Expo 2014

Posted on April 11, 2014 by Drew Franklin

“Business is booming in the Permian Basin! Join us in Midland, TX April14-15, 2014 as industry professionals from all over the region gather to discuss current products and services, demonstrate the latest and greatest innovations in industry technology, network with colleagues and make some deals!” – event description from The Permian Basin Petroleum Association Magazine

View the event info here – Midland Energy Expo 2014

SPOC Automation will be present at this year’s conference. Make sure to check with our sales rep about the new color WiseGuy.

Out-west-training-1.jpg

 

Smart. Intuitive. Easy. That’s what customers are saying about the WiseGuy DL VFD interface that is optional on IronHorse Series Drive packages. If you know industry terminology like “Daily Strokes,” “Run Time History” or “Pump Offs” then you can operate the WiseGuy DL. It’s that easy. Knowledge is power in the hands of your pumpers and the WiseGuy DL give you live trending, history, date & time stamp, data logging, single touch USB downloads, and much more in the industry’s easiest to use, smart and intuitive drive package.

Using the WiseGuy DL, the most recent 30 day production history and up to the last 97 pump off events are graphically viewable and downloadable.

Iron horse wiseguy screen

Sensorless Pump Off Control

IronHorse drives, with the addition of SPOC (Sensorless Pump Off Controller) software, give you the ability to run your beam pumps and slow them down automatically if enough fluid is available, at pump off rather than stopping the motor. Utilizing the self-teaching mode, the IronHorse with SPOC software will run the pump at optimal speed for the wells inflow rate and maximize production. This will extend the life of the equipment and in most cases, increase production, getting you the maximum return on your investment. In the event your well does not produce enough inflow to keep producing a slower speed, then you simply set the SPOC software up to stop like traditional pump off controllers. What’s more, there are no costly sensors or load cells to install on the pumping unit that can be damaged, which would rend the unit inoperable.

THE MORE WE KNOW, THE MORE OUR CUSTOMERS PROFIT

Change in the oil and gas industry is as constant as the sun rising in the east. Every year, we learn new techniques for lifting product from the ground more efficiently and for lower cost. At SPOC Automation, we are passionate about sharing our insights, our hard-earned lessons with our channel partners and our customers. Here, we'll discuss new innovations in lifting technology and all of its many applications.

speak to a spoc expert

jet pump drive whitepaper

injection pump webinar